M18 FUEL™ RINGER™ Roll Groover for 1-1/4” - 4” Sch 10/40, 6” Sch 10
Tool Options
In The Box (4)
Specs
Performance
Product Overview
Our M18 FUEL™ RINGER™ Roll Groover for 1-1/4” - 4” Sch 10/40, 6” Sch 10 is the industry’s first cordless Roll Groover, designed to optimize the productivity of on-site grooving. Delivering on the fastest setup and unparalleled portability, the M18 FUEL™ RINGER™ enables operators to work where it's most convenient without the limitations of a cord. Driven by the power of M18 FUEL™, the RINGER™ eliminates the strain of traditional grooving, enabling sprinkler fitters the ability to work efficiently anywhere, even at the point of installation. With runtime up to 50 2.5” Sch 10 grooves per charge, the M18 FUEL™ RINGER™ stands up to the demands of a day on the jobsite. The easy-to-use groove controls enable the operator to simply select pipe material, size, and schedule to control groove depth. The groove depth offset control also provides the ability to adjust groove depth to the tolerance of a specific pipe batch, eliminating ratcheting & cranking, reducing guess and check, and enabling hands-free operation – making the M18 FUEL™ RINGER™ the easiest way to groove on-site.
Designed for the Sprinkler Fitter
Grooves 1-1/4” – 6” Sch 10, 1-1/4” - 4” Sch 40
Fastest Setup to Finish, Work Anywhere
Easiest Way to Groove
Up to 50 2.5" Sch 10 Grooves Per Charge
Easiest Transportation for Maximum Productivity
No Ratcheting, No Cranking
Operates in Less Than 4-1/2” of Clearance for Best Access
One-Key™ technology allows for tracking, tool security, and inventory management
REDLINK PLUS™ intelligence enables advanced communication between batteries and tools for unmatched performance, protection, and productivity.
POWERSTATE™ brushless motor provides more power, more run-time, and longer life
Product Documents
Reviews
Product FAQ
Q:
What is the pipe size capacity of the M18 FUEL™ RINGER™ ROLL GROOVER?
A:
There are two M18 FUEL™ RINGER™ Roll Groovers models, each with different pipe size capacity
Q:
What space is required to operate the M18 FUEL™ RINGER™ ROLL GROOVER?
A:
The RINGER™ requires just 4.5” of radial clearance and 17” of axial clearance.
Q:
Do you need to measure grooves made by theM18 FUEL™ RINGER™ ROLL GROOVER?
A:
Yes, all grooves completed by the RINGER™ should be measured to confirm accuracy before installation.
Q:
Does M18 FUEL™ RINGER™ Roll Groover meet grooved pipe specifications?
A:
The RINGER™ when used properly will produce grooves that meet AWWA C606 requirements for 2” to 6” pipes.
Q:
Can the RINGER™ Groove short lengths that are too short for a pipe stand?
A:
Yes, for lengths allowed by coupling manufacturers but too short to easily secure in chain vise, the pipe can be placed in the RINGER™ while on a stable surface, the RINGER™ will default to benchtop mode with no additional steps.
Q:
Do I need to touch the M18 FUEL™ RINGER™ ROLL GROOVER during its grooving cycle?
A:
No, its recommended to always keep hands away from the tool after starting the groove cycle, if the tool must be stopped for any reason, use the rear stop farthest from the grooving rollers.
Q:
Does M18 FUEL™ RINGER™ ROLL GROOVER meet required grooved pipe specifications?
A:
The RINGER™ when used properly will produce grooves that meet AWWA C606 requirements for 2” to 6” pipes.
Q:
What is a Roll Groover?
A:
A roll groover uses rotating pressure to cold-form a pipe, forming a circular groove without removing material.
Q:
What is a Roll Groover used for?
A:
A roll groover is used to create grooves in the ends of pipes to allow them to be joined with mechanical couplings or fittings. Roll Grooving is often used in sprinkler-fitting and drainage systems.
Additional Resources
Explore the systems
M18 FUEL™ RINGER™ Roll Groover for 1-1/4” - 4” Sch 10/40, 6” Sch 10
© 2025 by Milwaukee Tool. All rights reserved.